Technical laboratory scales

Once a stable value appears on the screen, you will be able to read the weight of the weighed good The scale is constructed in such a way as to obtain reliable measurement results under the appropriate conditions of use. You will get accurate and fast results if you select the right place to place the scale Weighing GLP / ISO accounting, weight adjustment, etc. with the date, time and identification number only in combination with the KERN printer. Ideal for monitoring and documenting processes and in accordance with your quality management system

PRE-COUNTRY FUNCTION

This function stores the weight of a TARA container. The scale will work with the stored COUNTRY value, even after it is turned off / on

WEIGHING PLUS / MINUS

For example. for piece weight control, quality control, etc Using the same procedure, packages of the same weight can be made depending on the target weight

PIECE COUNTING

With this function you can count pieces in a container or pieces taken out of a container. In order to be able to count a larger number of pieces you must determine the average weight per piece using a small quantity (reference number of pieces). The higher the reference number of pieces, the greater the accuracy. The reference value must be selected differently depending on the metered pieces. The higher the reference number of pieces, the more accurate the piece count will be

COUNTRY FUNCTION TARA

containers can also be used for the metering function

TOTAL NET WEIGHTS

A useful function when weighing several components of a mixture in a TARA container, and finally the value of the weighed components is needed to control the total amount (total net, ie without the weight of the TARA container).

DETERMINATION OF THE PERCENTAGE

The function allows the weight to be displayed as a percentage, depending on the reference weight, which corresponds to 100%.

DOSAGE AND ZERO-TRACKING

Auto-zero allows automatic TARA function for small weight oscillations. If small quantities are added or extracted to the measured good, erroneous results can be obtained due to the "stability compensation" function. (Ex: slow draining of liquids from a container placed on the scale). In case of dosing with small weight deviations we recommend deactivating this function. With zero-tracking disabled, the display on the scale is no longer stable.

SELECTING WEIGHT ADJUSTMENT

In the case of the KERN PCB series, the adjustment weight can be selected from four or five given nominal values ​​(depending on the model). In order to obtain optimal measured results, we recommend selecting a nominal value as high as possible. You can also use other adjustment weights from KERN

BACKGROUND LIGHTING DISPLAY

• Backlit LCD screen with digit height: 15 mm ANIMAL WEIGHING FUNCTION In this function, the scale determines the average value of the measured results over a certain period of time

RESTORATION OF MANUFACTURING SETTINGS INTERFACE PARAMETERS

The data output is done through the RS 232 C interface.

GENERAL

The basic condition for data transfer between the scale and a peripheral device (PC, printer) is that the two devices are set to the same interface parameter (eg Baud rate, transfer mode, etc.). PRINT With this function, select the data to be sent via the RS232C interface (not valid for BAPr data transfer mode).

• DATA OUTPUT RS 232 C
• BAR CODE PRINTING SERVICES (ON REQUEST) 
• DAkkS Certificate

• Charging time: 8 hours
• Input voltage: 220 V - 240 V alternating current with a frequency of 50 Hz
• Operating time: 12 hours
• Operating time (without lighting): 48 h
• Operating time (backlight): 24 h
• Battery: Rchrg. (battery option)

NETWORK CONNECTION

Power is supplied by an external power supply. The voltage value printed on the machine must correspond to the local voltage. Use only original power supplies. Use of other products requires KERN approval

SIZING / Calibration 

Because gravitational acceleration does not have the same value in any corner of the world, each scale must be calibrated - according to the universal physical principle of weight - according to the gravitational acceleration of that location (if the scale has not already been calibrated at the location). . This calibration must be carried out at the first start-up, after each change of location or after a change in ambient temperature. To obtain accurate measurement results, we recommend periodic calibration of the device.

CATEGORY

• Category: scales
• Group: technical scales (precision)

ENVIRONMENT CONDITIONS

• Maximum humidity: 80%
• Maximum ambient temperature: 35 ° C
• Minimum ambient temperature: 5 ° C

PACKAGING

• General dimensions (W × D × H): 230 mm x 357 mm x 180 mm
• Total weight: 1,800 kg
• Net weight: 1,400 kg

DELIVERY CONTENT

• Scale
• Scale plate
• Mains power supply
• Protective cover
• User manual

OPTIONS:

• RS 232 adapter
• Software connection
• Battery: Rchrg.
• Printer
• Printer cable
• Printer paper